From: Iain Lennon (ril_at_doctors.org.uk)
Date: 2002-02-07 16:21:17 UTC
Hi
I'm trying to set up a ZoomAir 4105 card just to simply work under Mandrake
8.1 linux: It's Prism 2 based, and works under Win98
I've installed the Prism2 package as instructed into a pcmcia-cs 3.1.30 tree and configured/made/installed it
In Ad-hoc I can get the driver to set the card such that a Win98 computer with another card can identify the linux BSSID. Also, it will not associate if the SSID is incorrect.
However, I cannot ping across the network
In AP mode, the card cannot be found by the win 98 computer
I enclose a section from my syslog with pcmcia going up (, plus some other error messages I've found
AP mode
Feb 7 16:17:58 blacktower kernel: Linux PCMCIA Card Services 3.1.30
Feb 7 16:17:58 blacktower kernel: kernel build: 2.4.8-26mdk #1 Sun Sep 23
17:06:39 CEST 2001
Feb 7 16:17:58 blacktower kernel: options: [pci] [cardbus] [apm] [pnp]
Feb 7 16:17:58 blacktower kernel: PnP: PNP BIOS installation structure at
0xc00fc000
Feb 7 16:17:58 blacktower kernel: PnP: PNP BIOS version 1.0, entry at
f0000:c028, dseg at f0000
Feb 7 16:17:58 blacktower kernel: Intel ISA/PCI/CardBus PCIC probe: Feb 7 16:17:58 blacktower kernel: PCI: Found IRQ 12 for device 00:0b.0 Feb 7 16:17:58 blacktower kernel: TI 1410 rev 01 PCI-to-CardBus at slot 00:0b, mem 0xe9901000 Feb 7 16:17:58 blacktower kernel: host opts [0]: [serial pci & irq] [pci irq 12] [lat 32/176] [bus 2/5] Feb 7 16:17:58 blacktower kernel: PCI irq 12 test failed Feb 7 16:17:58 blacktower kernel: ISA irqs (default) = 3,4,9 pollinginterval = 1000 ms
Feb 7 16:17:58 blacktower cardmgr[5646]: starting, version is 3.1.30 Feb 7 16:17:58 blacktower cardmgr[5646]: watching 1 sockets Feb 7 16:17:59 blacktower kernel: cs: memory probe 0xa0000000-0xa0ffffff:clean.
Feb 7 16:17:59 blacktower kernel: prism2: setting Vcc=33 (constant) Feb 7 16:17:59 blacktower kernel: prism2: CS_EVENT_CARD_INSERTION Feb 7 16:17:59 blacktower kernel: prism2_config() Feb 7 16:17:59 blacktower kernel: prism2: setting Vcc=50 (from config) Feb 7 16:17:59 blacktower kernel: CISTPL_MANFID: 0x0156, 0x0002 Feb 7 16:17:59 blacktower kernel: Lucent-based card Feb 7 16:17:59 blacktower kernel: Checking CFTABLE_ENTRY 0x01 (default0x01)
Feb 7 16:17:59 blacktower kernel: cs: IO port probe 0x0100-0x04ff: clean. Feb 7 16:17:59 blacktower kernel: cs: IO port probe 0x0800-0x08ff: clean. Feb 7 16:17:59 blacktower kernel: cs: IO port probe 0x0a00-0x0aff: clean. Feb 7 16:17:59 blacktower kernel: cs: IO port probe 0x0c00-0x0cff: clean. Feb 7 16:17:59 blacktower kernel: prism2: index 0x01: Vcc 5.0, irq 3, io0x0100-0x013f
Feb 7 16:17:59 blacktower kernel: prism2: Registered netdevice wlan0 Feb 7 16:17:59 blacktower kernel: prism2_hw_config() Feb 7 16:17:59 blacktower kernel: prism2_hw_config: initialized in 9770iterations
Feb 7 16:17:59 blacktower kernel: wlan0: NIC: id=0x8003 v1.0.0 Feb 7 16:17:59 blacktower kernel: wlan0: PRI: id=0x15 v0.3.0 Feb 7 16:17:59 blacktower kernel: wlan0: STA: id=0x1f v0.8.3 Feb 7 16:17:59 blacktower cardmgr[5646]: executing: './network start wlan0' Feb 7 16:17:59 blacktower kernel: prism2: wlan0 unsupported WIRELESS_EXTioctl(0x8b2d)
When pinging from linux to win machine
Feb 7 16:23:05 blacktower kernel: wlan0: hfa384x_setup_bap - timeout3 Feb 7 16:23:05 blacktower kernel: wlan0: prism2_tx - to BAP0 failed Feb 7 16:23:05 blacktower kernel: prism2: wlan0: resetting card Feb 7 16:23:05 blacktower kernel: prism2_cor_sreset: original COR 41 Feb 7 16:23:05 blacktower kernel: prism2_hw_config() Feb 7 16:23:05 blacktower kernel: prism2_hw_config: initialized in 5664iterations
this is repeated for each ping
Has anybody got any clues!!! I'll happily supply any other log data required, etc, if necessary
Dr R.Iain Lennon