From: Cliff Albert (cliff_at_ipng.nl)
Date: 2002-02-27 23:03:06 UTC
On Wed, Feb 27, 2002 at 09:20:16PM +1100, Matthew Richards wrote:
Load the module i82356.o with the parameter irq_mode=1
Works fine on my Compaq WL200
> Hi all,
>
> I'm trying to get my RH 7.2 gateway box to work as an AP using a WL200 to a
> Win2k/WL100 laptop.. I did get the 2 to link up in Ad-Hoc mode, but I
> couldnt get any traffic between them. One thing that might be a problem..
> they both had their firemware flashed to 0.8.0 - would that be a problem?
>
> Any help would be greatly appreciated.
>
> Thanks,
> Matt
>
> Feb 27 20:48:51 shakesbeare kernel: Linux PCMCIA Card Services 3.1.31
> Feb 27 20:48:51 shakesbeare kernel: kernel build: 2.4.18 #4 Tue Feb 26
> 21:58:37 EST 2002
> Feb 27 20:48:51 shakesbeare kernel: options: [pci] [cardbus]
> Feb 27 20:48:51 shakesbeare kernel: Intel ISA/PCI/CardBus PCIC probe:
> Feb 27 20:48:51 shakesbeare kernel: PCI: Found IRQ 11 for device 00:0d.0
> Feb 27 20:48:51 shakesbeare kernel: PCI: Sharing IRQ 11 with 00:07.2
> Feb 27 20:48:51 shakesbeare kernel: Cirrus PD6729 rev 00 PCI-to-PCMCIA at
> slot 00:0d, port 0x9800
> Feb 27 20:48:51 shakesbeare kernel: host opts [0]: [ring] [pci irq 11]
> [1/5/0] [1/20/0]
> Feb 27 20:48:51 shakesbeare kernel: host opts [1]: [ring] [pci irq 11]
> [1/5/0] [1/20/0]
> Feb 27 20:48:51 shakesbeare kernel: PCI card interrupts, PCI status
> changes
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: starting, version is 3.1.31
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: watching 2 sockets
> Feb 27 20:48:51 shakesbeare kernel: cs: memory probe 0x0d0000-0x0dffff:
> clean.
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: socket 0: Compaq WL200
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: executing: 'modprobe prism2'
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: + modprobe: Can't locate module
> prism2
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: modprobe exited with status 255
> Feb 27 20:48:51 shakesbeare cardmgr[5060]: executing: 'insmod
> /lib/modules/2.4.18/pcmcia/prism2.o'
> Feb 27 20:48:51 shakesbeare kernel: prism2: prism2.c 0.0.0 2002-02-13 (SSH
> Communications Security Corp, Jouni Malinen)
> Feb 27 20:48:51 shakesbeare kernel: prism2: (c) SSH Communications Security
> Corp <jkm_at_ssh.com>
> Feb 27 20:48:51 shakesbeare kernel: Config has no IRQ info, but trying to
> enable IRQ anyway..
> Feb 27 20:48:51 shakesbeare kernel: cs: IO port probe 0x0100-0x04ff:
> excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
> Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0380-0x03bf: clean.
> Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x03e0-0x04cf: clean.
> Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x04d8-0x04ff: clean.
> Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0c00-0x0cff: clean.
> Feb 27 20:48:52 shakesbeare kernel: prism2: index 0x01: Vcc 3.3, irq 11, io
> 0x0100-0x013f
> Feb 27 20:48:52 shakesbeare kernel: prism2: Registered netdevice wlan0
> Feb 27 20:48:52 shakesbeare kernel: wlan0: NIC: id=0x8002 v1.0.1
> Feb 27 20:48:52 shakesbeare kernel: wlan0: PRI: id=0x15 v0.3.0
> Feb 27 20:48:52 shakesbeare kernel: wlan0: STA: id=0x1f v0.8.0
> Feb 27 20:48:52 shakesbeare cardmgr[5060]: executing: './network start
> wlan0'
> Feb 27 20:48:52 shakesbeare cardmgr[5060]: + /usr/local/sbin/iwconfig wlan0
> essid "matt"
> Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_setup_bap - timeout3
> Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_set_rid - to BAP0 failed
> Feb 27 20:48:52 shakesbeare kernel: prism2: wlan0: resetting card
> Feb 27 20:48:52 shakesbeare cardmgr[5060]: + Error for wireless request "Set
> ESSID" (8B1A) :
> Feb 27 20:48:52 shakesbeare kernel: wlan0: TXRateControl setting to 15
> failed
> Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_setup_bap - timeout3
> Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_set_rid - to BAP0 failed
> Feb 27 20:48:52 shakesbeare kernel: prism2: wlan0: resetting card
> Feb 27 20:48:52 shakesbeare cardmgr[5060]: + SET failed on device wlan0
> ; Invalid argument.
>
> # iwconfig wlan0
> Warning : Device wlan0 has been compiled with version 12
> of Wireless Extension, while we are using version 11.
> Some things may be broken...
>
> wlan0 IEEE 802.11-DS ESSID:"matt"
> Mode:Managed Frequency:2.412GHz Access Point: 44:44:44:44:44:44
> Bit Rate:2Mb/s Tx-Power:10 dBm Sensitivity=1/3
> Retry min limit:8 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:0 Signal level:0 Noise level:0
> Rx invalid nwid:0 invalid crypt:0 invalid misc:0
>
-- Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net cliff_at_oisec.net | 6BONE: CA2-6BONE | icq 18461740